Metal laser cutting machine is the use of laser technology to achieve the transformation of metal professional equipment, often use the relevant staff of metal laser cutting machine should know that its effect is affected by many factors, such as the most common temperature, the following to We will explain in detail the effects of temperature on the impact of metal laser cutting machine.
In general, the key component of CNC is the numerical control system. Its working environment is generally between -5 degrees and +70 degrees. In this upper temperature range, the effect of high temperature and low temperature on the metal laser cutting machine is small and the temperature is too low. At the end, it can lead to trachea and cable break easily, relying on leakage and poor solution and other faults!
For the metal laser cutting machine motor, it has little effect, because the metal laser cutting machine rarely use liquid lubricants, so there will be no freezing site, this everyone rest assured! In any case, if there are conditions or to ensure that the shop temperature is better than 0 degrees, not too low, long-term low-temperature operation, easily lead to excessive mechanical wear and premature aging!
In the use of metal laser cutting machine when the temperature should not be too high, will affect the control of the CNC system, built in the crash, slow response and other issues, so the use of metal laser cutting machine at the appropriate temperature is very necessary.
It is very important to maintain the proper temperature for the metal laser cutting machine to work properly. This will also prolong the service life of the metal laser cutting machine. Therefore, the operator must pay sufficient attention to this aspect.