Laser cutting uses a focused high power density laser beam to irradiate the workpiece, rapidly irradiate, vaporize, ablate, or reach the ignition point of the irradiated material. At the same time, the workpiece is cut by blowing molten material with a high-speed airflow coaxial with the beam. open. Laser cutting is one of the hot cutting methods. The specific advantages of laser cutting compared to other thermal cutting methods can be summarized as follows:
Good cutting quality: Due to the small laser spot, high energy density, and high cutting speed, laser cutting can achieve better cutting quality. 1 The laser cutting incision is narrow, the slits are parallel on both sides and perpendicular to the surface, and the dimensional accuracy of the cut parts can reach ±0.05 mm. 2 The cutting surface is smooth and beautiful, the surface roughness is only a few tens of microns, and even laser cutting can be used as the last process without mechanical processing. Components can be used directly. 3 After the laser cutting, the width of the heat affected zone is very small, and the performance of the material near the slit is hardly affected, and the workpiece deformation is small, the cutting accuracy is high, the geometry of the slit is good, and the cross section of the slit shows a more regular pattern. Rectangles.
Cutting speed: Cutting 2mm thick low-carbon steel plate with laser with 1200W power, cutting speed up to 15000px/min; cutting polypropylene resin plate with 5mm thickness, cutting speed up to 30000px/min. The material does not need to be clamped during laser cutting, which can save the fixture and save the auxiliary time for loading and unloading.
Non-contact cutting: When the laser cutting, the torch and the workpiece have no contact, there is no tool wear. To machine parts of different shapes, there is no need to replace the "tool", just change the output parameters of the laser. The laser cutting process has low noise, little vibration, and no pollution.
The types of cutting materials are many: Compared with oxyacetylene cutting and plasma cutting, there are many kinds of laser cutting materials, including metal, non-metal, metal-based and non-metal-based composite materials, leather, wood, and fibers. However, different materials have different laser cutting suitability due to their own thermophysical properties and different laser absorption rates.
In summary, from the perspective of market conditions, the laser processing market has grown steadily. Under the backdrop of weak macroeconomic and industrial demand, laser processing equipment has maintained a steady growth in industry scale with its business demand in the high-end processing market. Compared with the traditional machine tool cutting and other thermal processing, laser processing has multiple technical advantages, which are in line with the requirements of high-precision, low wear, high efficiency and other requirements of the high-end processing market.
Product Description
TYPE CD1/MD1 wire-rope Electric Hoist is a kind of small-lifting equipment.It can mounted on single beam overhead cranes.Gantry Cranes, Jib Type CD,electric hoist as only one normal speed which can satisfy normal application. It is widely used in factories, mines, harbors, cargo storage area and shops,essential in raising working efficiency and improving working conditions. We can provide Electric Wire Rope Hoist with motorized Trolley , remote control and other hoist accessories.
Features:
1. The normal travelling speed: 20m/min (dual speed 20/6 is optional)
2. Hoist electrics cubicle including low voltage transformer
3. Motor protection IP54 insulation class F
4. Push button box with emergency button
5. Rope guide for use in aggressive environment
6. Remote control is optional, Hook with safety latch
7. hoist is made under the FEM European standard, with planetary gearbox(low noises and free maintenance).
8. The motor and gearbox are installed at the same side, help the hoist to run smoothly and increase of service life.
Specifications:
|
Model |
CD1 0.5T |
CD1 1T |
CD1 2T |
CD1 3T |
CD1 5T |
CD1 10T |
CD1 16T |
CD1 20T |
CD1 25T |
CD1 32T |
||
|
Capacity (t) |
0.5 |
1 |
2 |
3 |
5 |
10 |
16 |
20 |
25 |
32 |
||
|
Lifting height (m) |
6-12 |
6-30 |
6-30 |
6-30 |
6-30 |
9-30 |
9-18 |
9-18 |
9-24 |
9-24 |
||
|
Lifting speed (m/min) |
8 |
8 |
8 |
8 |
8 |
7 |
3.5 |
3.5 |
2.4 |
2.4 |
||
|
Running speed (m/min) |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
20 |
- |
||
|
Wire rope type |
D-6X37+1 |
D-6X37+1 |
D-6X37+1 |
D-6X37+1 |
D-6X37+1 |
D-6X37+1 |
D-6X37+1 |
D-6X37+1 |
D-6X37+1 |
D-6X19+1 |
||
|
I-beam track type |
16-28b |
16-28b |
20a-32c |
20a-32c |
25a-63c |
25a-63c |
45a-63c |
50a-63c |
50a-63c |
50a-63c |
||
|
Min. radius of curve (m) |
1.5 |
1.5-4 |
2-4 |
2-4 |
2.5-5 |
2.5-9 |
3-4.6 |
3-4.6 |
3-4.6 |
|
||
|
Power supply |
380V-440V,50/60HZ,3P |
|||||||||||
|
Working duty |
Mid M3 |
Mid M3 |
Mid M3 |
Mid M3 |
Mid M3 |
Mid M3 |
Mid M2 |
Mid M2 |
Light M6 |
Light M3 |
||
Product Photos:
FAQ:
What is our factory product range?
1) We are specialize in chain block, lever block, electric hoist, Webbing Sling, cargo lashing,
Hydraulic Jack, forklift, mini crane, etc.
2) Hoist Accessories: Load Chain , wire rope, Rigging , hook ,pulley and shackles.
How to order the products?
Send the inquiry with detail item description or with ITEM number. Tell us the quantity you need, the size of goods, and the packing.
If there is no packing demand we take it as seaway packing.
If possible please attach one reference picture to avoid any misunderstanding or any links from our website for we get a better understanding.
About sample:
Cost with free if the quantity small, and the express charge account into buyer`s.
About payment:
T/T, LC in U.S. Dollars or EUR, for small orders, PayPal is ok.
About lead time:
Cause all of our products manufacturer according customers order,
usually within 35-40 days after receipt of your deposit.
How Will My Order Be Shipped?
Usually shipped by sea, small order or urgent order can by air or by courier after received your agreement.
How long does it take to receive my order?
According the distance from China to your port. Usually from China to European about 22 days.
To West of American 20 days. To Asia 7 days or more.
To Middle East more 30 days.
By air or by courier will be faster, within 7 days.
About mini order:
Different products with different limited, please contact us to confirm.
What's your quality guarantee?
We have different kinds of products which can meet different quality standard.
QC department will teset products before shipping. We have 100% quality guarantee to customers. We will be responsible for any quality problem.
What's benefit will you bring?
Your client satisfied on the quality.
Your client continued orders.
Your can get good reputation from your market and obtain more orders.
Our Services
1.Client
We treasure and try to understand all the different needs of our clients and seek to forge a long term professional relationship with them. The satisfaction of each and every customer is our main goal and motivation in conducting our business.
2. People
We work as a team and treat each other with respect. Our solid, capable and knowledgeable team is valued as the greatest asset and an integral part of the business.
3. Product
Our products are of HIGH quality standards and always come with certificate of compliance by the manufacturers.
4. Performance
We aim to achieve high level of performance and satisfaction to both our client and people, which include delivering high quality services and treating people with integrity.
5. Free sample and OEM service
We can provide free samples to you and we also have OEM service, we can put your logo on the label and the information you need on the webbing too.
Electric Wire Rope Hoist
Electric Wire Rope Hoist,Electric Wire Rope Hoist Drum,Wire Rope Hoist Load,Electric Wire Rope Hoist Winch
Hebei Liston Lifting Rigging Manufacturing Co., Ltd. , https://www.liftingriggingfactory.com