Dongfeng Tianlong Tanker

Dongfeng Tianlong Oil Tanker: Also known as Dongfeng Tianlong Mobile Refuelling Vehicle, Computer Tax Control Refuelling Vehicle, Oil Tanker Truck, Dongfeng Fuel Loading Vehicle, Dongfeng Oil Tanker, Oil Puller, Oil Transporter, Edible Oil Transport Vehicle, mainly used The transportation and storage of petroleum derivatives (gasoline, diesel, crude oil, lubricating oil, coal tar, etc.). According to different use and use environment, there are many kinds of refueling or transporting oil functions, which have the functions of oil absorption, pump oil, multiple oil loading and distribution. The special part of the oil tanker consists of tanks, power take-off devices, transmission shafts, gear oil pumps, and pipe network systems. The pipe network system consists of oil pumps, three-way four-position ball valves, two-way ball valves, strainers and pipes. [1]

Separate positions can be separated, and different oils can be dispensed, and pumps can be pumped out of the table.

The tank material is made of high-quality carbon steel plates produced by Wuhan Iron and Steel Company.

Cans are round, oval, and round. The tank body adopts advanced butt welding technology. After the tank body is formed, the shot blasting pretreatment process is adopted. The high-pressure gas leak test is used. The tank body has high strength, stable center of gravity and beautiful appearance and durability.

Oil pumps use self-priming pumps and gear pumps.

The oil gauge uses a zero return flow meter or a vehicle-mounted tax-controlled computer fueling machine.

1. Tanker trucks should be equipped with special fire extinguishers and should be equipped with tow subway chains and electric poles. When driving, the tow subway chain should be in contact with the ground; when refueling or draining, it must be inserted into the damp ground.

2. The oil tank filling hole should be tightly sealed, the oil discharge valve and the oil discharge pipe should be free of leakage, the tank vent hole should be unimpeded, the oil pump oil inlet filter should be cleaned frequently, and the two ends of the joint cover should be installed immediately after the delivery oil hose is used up. No dirt can enter.

3. Gasifiers and exhaust pipes of internal combustion engines must not be tempered. The exhaust pipe should be installed in front of the vehicle.

4. Tanker workers must not wear nailed shoes. It is forbidden to smoke near the oil tank and fire is strictly prohibited.

5. When parking, you should stay away from the fire source. During the hot season, you should choose a cool place to park. During a thunderstorm, it must not be parked under trees or under high-voltage lines. When parking in the middle of driving, there should be special care.

6. During the inspection and repair process, if the operator needs to enter the oil tank, it is strictly prohibited to carry the fire, and must have reliable safety protection measures. The outside of the tank must have special personnel to monitor.

7. All electrical devices in the vehicle must be well insulated and no sparks are allowed. Vehicle work lighting should be a safety light of 36V or less.

8. When the tank sedimentation tank is frozen, it is forbidden to use fire to bake, and it may be used to melt hot water, steam, or thaw the car into the greenhouse.

9. When carrying out maintenance and inspections under the vehicle, the internal combustion engine should be turned off, the hand brake should be tightened, and the wheels should be secured.

10. When a vehicle needs repair after repair, it should be driven by a qualified person. The vehicle must not be loaded with people and carry loads. When a vehicle needs to be tested on the road, a test license issued by the traffic management department should be affixed.

11. When parking on a ramp, a reverse gear should be hung on a downhill parking, a gear should be hung on an uphill parking, and a triangle wooden wedge should be used to fasten the tire.

1. Tanker trucks should be equipped with special fire extinguishers and should be equipped with tow subway chains and electric poles. When driving, the tow subway chain should be in contact with the ground; when refueling or draining, it must be inserted into the damp ground.

2. The oil tank filling hole should be tightly sealed, the oil discharge valve and the oil discharge pipe should be free of leakage, the tank vent hole should be unimpeded, the oil pump oil inlet filter should be cleaned frequently, and the two ends of the joint cover should be installed immediately after the delivery oil hose is used up. No dirt can enter.

3. Gasifiers and exhaust pipes of internal combustion engines must not be tempered. The exhaust pipe should be installed in front of the vehicle.

4. Tanker workers must not wear nailed shoes. It is forbidden to smoke near the oil tank and fire is strictly prohibited.

5. When parking, you should stay away from the fire source. During the hot season, you should choose a cool place to park. During a thunderstorm, it must not be parked under trees or under high-voltage lines. When parking in the middle of driving, there should be special care.

6. During the inspection and repair process, if the operator needs to enter the oil tank, it is strictly prohibited to carry the fire, and must have reliable safety protection measures. The outside of the tank must have special personnel to monitor.

7. All electrical devices in the vehicle must be well insulated and no sparks are allowed. Vehicle work lighting should be a safety light of 36V or less.

8. When the tank sedimentation tank is frozen, it is forbidden to use fire to bake, and it may be used to melt hot water, steam, or thaw the car into the greenhouse.

9. When carrying out maintenance and inspections under the vehicle, the internal combustion engine should be turned off, the hand brake should be tightened, and the wheels should be secured.

10. When a vehicle needs repair after repair, it should be driven by a qualified person. The vehicle must not be loaded with people and carry loads. When a vehicle needs to be tested on the road, a test license issued by the traffic management department should be affixed.

11. When parking on a ramp, a reverse gear should be hung on a downhill parking, a gear should be hung on an uphill parking, and a triangle wooden wedge should be used to fasten the tire.