The stainless steel shock-proof pressure gauge housing and the internal original are made of stainless steel and filled with silicone oil in the body of the watch , so that the pointer of the pressure gauge can play a role of shock absorption and shock resistance. Stainless steel seismic pressure gauges are shock- resistant performance of shock-proof pressure gauges , and stainless steel pressure gauges are resistant to corrosion. Stainless steel shock-proof pressure gauges are suitable for occasions where the vibration of industrial and mining sites is large and the medium to be measured is corrosive.
Stainless steel shock gauge installation seven major preventive measures:
1. The ambient temperature of the instrument is -40~70°C, and the relative humidity is no more than 80%. If it deviates from the normal use temperature by 20 5°C, the additional temperature error must be included.
2. The meter must be installed vertically to try to maintain the same level as the measurement point. If the difference is too high, the additional error caused by the liquid column is included. The measurement gas may not need to be considered. During installation, the rear explosion vent of the case should be blocked so as not to affect the explosion-proof performance.
3. Measurement range for normal use of the instrument: 3/4 of the upper measurement limit under static pressure and 2/3 of the upper measurement limit under fluctuation. In the case of the above two pressures, the measurement of a large pressure gauge should not be less than 1/3 of the lower limit, and the vacuum portion should be used when measuring vacuum.
4. In case of any troubles such as failure of the instrument pointer, loose internal parts, or failure of normal operation, etc., during maintenance, contact the manufacturer for repair.
5. The meter should avoid vibration and collision to avoid damage.
6. Please specify when ordering: the model and name of the instrument; the measuring range of the instrument; the accuracy level of the instrument deviates from the positive packaging requirements and others.
7. Stainless steel shock gauges are not suitable for use in environments with strong oxidants such as oxygen, chlorine, nitric acid, and hydrogen chloride.
Anhui Tiankang Group is located in the beautiful and fertile eastern Pearl ----- Tianchang City of Anhui Province, south of historical and cultural city Nanjing, east of Yangzhou Slender West Lake, tightly connected to the expressway, convenient transportation, and information flow. Provide superior conditions for enterprise development. Unity, pragmatism, innovation and development are eternal beliefs of Tiankang people. The trust of customers is the tireless pursuit of Tiankang. The support of users is our success, and we will work hard to revitalize the national industry. , To provide our customers with more satisfactory products and services
Flexible Fabric Compensator,Flange Device Cover,Flange Insulation jackets,Non-Metallic Expansion Joints
Taixing Yingxing Composite Material Co.,Ltd , https://www.ptfecnyx.com