What is the role of the positioning light?
Positioning lights, also known as position lights, car width lights are also commonly known as small lights, the purpose is to allow the locomotive to be in the dark and dark days, other passers-by can judge the size and position of the vehicle. The car part has mandatory provisions for positioning lights on the left and right sides to indicate the width of the car. Motorcycles are either left-right symmetrical or central single-position lights.
Positioning lights in the locomotive regulations are more flexible, both sides or single lamp design can be
For a round lamp design like the SV650, some will design the positioning light inside the headlights, and the small light bulb below will be the light bulb for the positioning lights.
Is it only possible to drive the positioning lights at night?
The brightness of the positioning light is low, it is almost invisible during the day, and the viewing distance is limited at night. More importantly, the brightness of the positioning light cannot illuminate the road ahead, and you cannot ride normally.
The headlights are on, do you still need a positioning light?
When the headlights are turned on, the function of the positioning light is replaced by the headlights, and there is no need for a positioning light. However, the headlights consume a lot of power, so many locomotives will only light up the positioning lights after power-on (for example, F800R: a total of 3 bulbs for small and small eyes, small eyes are separate high-beam lights; large eyes include positioning lights, low beam lights After the power is turned on, the positioning light is turned on, the engine is turned on to the low beam light, the handle is controlled to control the other big eye to light the high beam light, and the headlight is turned on after the engine is started. In the locomotive design, the positioning lamp is shaped. Can also become one of the features.
BMW's classic size eyes actually have three "eyes", and the small eyes are high beam lights~
The headlights are turned on, and the function of the positioning lights has actually fallen.
VJR's V-shaped positioning lights become the style's features
What is the role of daytime running lights (DRL)?
As studies by the traffic control departments of various countries have shown that turning on the lights during the day can improve visibility and reduce accidents, there is a mandatory requirement for daytime running lights. Some national regulations require that if the daytime running lights are not designed, the low beam can be forced to be replaced, which is why the imported cars that we ride cannot turn off the lights. It is a pity that there is no such law in China that is mandatory for motorcycles. Most of the passing locomotives have a light switch. They can be turned off instead of always on. In actual riding: it is dark, dim, dim, and dim under the overpass. In the darkness of the cave, I hope that you will develop good safety habits and keep the lights on. Many bad bulbs are not smashed. It is much worse than being replaced by a light bulb!
X Diavel S's daytime running lights are highly recognizable even in the case of some backlighting of the sun.
Are the LED lights other than the headlights daytime running lights?
Because of the high brightness of the LED, it is a common light source for daytime running lights, but the LED is not necessarily a daytime running light. As long as the brightness does not meet the requirements, it can only be called a positioning light.
Do you need a constant day low beam group for daytime running lights?
No, the daytime running lights can be replaced by a constant light group. The best example is DUCATI's recent use of DRL models, such as SuperSport full car, X Diavel S, etc.: Because of the special daytime running lights, it is generally brighter than other lights. The locomotive, SuperSport and X Diavel S's low beam lights can be turned off.
Can I only drive daytime running lights when I ride at night?
Although the daytime running lights have high brightness, there is no light distribution requirement for low beam lights, and daytime running lights cannot produce an effective light pattern to illuminate the road surface. With daytime running lights, other passers-by and vehicles can see you, but you can't see the way!
As a supplier for DIN 7979 DOWEN PIN With screw,DIN 6325 Dowel Pin with round head,Suj2/40cr/40# steel Dowel pin,m6/h6 tolerance dowel pin for moulds.Competitive price with best quality,fast lead time and precision tolerance.We enjoyed perfect reputation from all of them.Looking forward to cooperate with you.
Dowel Pin
Dowel Pin,Steel Dowel Pins,Stainless Steel Dowel Pins,Metal Dowel Pins
Changsha Borun Mould Co. Ltd. , http://www.borunmouldparts.com