Automatic Venting Valve Introduction During the operation of the heating, ventilation and HVAC systems, the harmful effects caused by the water (such as hydrogen and oxygen) released from the water during heating can damage the system and reduce the thermal effects. If these gases can not be discharged in time Lost will have a lot of adverse consequences. Such as: corrosion caused by oxidation; the formation of airbags in the radiator; unbalanced hot water circulation is not smooth, so that some radiators do not partially heat; noise when the pipe runs with gas; vortex phenomenon circulating pump. This shows that the use of automatic exhaust valve an important role. The new automatic vent valve design takes into account all the known disadvantages, such as impurities in the water, oil, suspended solids, turbulence in the valve liquid during venting, vibrations in the piping and equipment to which the vent valve is connected, and more. ) Excellent performance: Reliable operation no matter whether the system has just been filled with water (a large amount of gas is discharged when the system is operating), or when the system pressure is too high, it requires proper drainage and pressure relief. First, the characteristics: 1. Reliable performance. Exhaust valve exhaust mechanism is very reliable, at the factory before each valve through the exhaust test and pressure seal experiment. Individual components are cast from high precision, resulting in a perfect fit. 2. Easy to maintain. Automatic venting is fitted with a shut-off valve that allows easy removal of the vent valve from the system for maintenance while the water in the system will not flow out, so there is no need to empty the system. 3. Only exhaust, no drainage. Steam, water disc design using a special structure to ensure that when the exhaust is not drained. 4. As long as the system is under pressure, the exhaust valve will continuously exhaust. Second, the main purpose: Automatic exhaust valve for: independent heating system; central heating system; radiant floor heating system; solar heating system; heat pump system; central air conditioning; heating boilers. Third, the automatic exhaust valve works When there is air in the system, the gas gathered in the upper part of the exhaust valve, the body bubble accumulation so that the float drops with the water level, so open the exhaust piston; gas exhausted, the water level rise, floating The ball also rises, closing the exhaust piston. If tightening the bonnet on the side of the body, the vent valve stops venting, and normally the bonnet should be open.
Titanium Pump For Sewage Treatment
Titanium pumps use the corrosion resistance, small specific gravity, high strength, and good high and low temperature comprehensive mechanical properties of titanium and titanium alloys when selecting materials for equipment manufacturing. Titanium is used at nodes such as flow parts, impellers and packing comprehensive seals. Or made of titanium alloy.
Titanium Pump For Sewage Treatment,Macerator Sewage Pump,Sewage Suction Pump,Sewage Drainage Pump
Baoji Rowlyn Metal Materials Co., Ltd. , https://www.rowlynti.com