Anhui Linbo intelligent three-roll gates and three-roll gates are made of standard 304 stainless steel. The inside of the tank is designed with a professional gutter, which can be installed indoors or outdoors. It is suitable for places where people's traffic rate is limited, with counting, attendance, and current limit. Other functions, such as ticketing system, ticket system for electronic ticketing system, ticketing system for playgrounds, and ticketing system for theater ticketing system, can be used to implement management functions such as ticket sales, ticket checking, ticket checking, and return tickets; typical applications: office space: business building , government agencies, etc., science and education institutions: institutions, research institutes, libraries, etc., commercial service establishments: supermarkets, shopping malls, hotels, clubs, banks, etc., leisure and entertainment establishments: parks, scenic spots, playgrounds, etc., transportation sites: bus stations , train stations, subway stations, airports, etc.
Detailed introduction â— Reasonable and reliable design, low noise, stable operation and long service life.
â— Standard switch signal input, convenient external switch or bar code, IC card, fingerprint and other access controller to control roller gate action.
â— There are multiple operating modes to choose from, that is, two-way card reading or fingerprint current limiting; it is also possible to read a card or fingerprint while prohibiting the other direction; while reading a card or fingerprint, the other direction is free.
â— Hydraulic shock absorbers can freely adjust the tripping position of the three-roll gates. â— Anti-backlash. Pedestrians enter the channel from the opposite direction and lock immediately.
â— Prevents tailgating and prevents an excessive number of non-permissible situations.
â— With power off the lever, manual power up function, in order to quickly control the drop in an emergency situation, organize the evacuation.
â— It has a unified and standard external electrical interface, which can be connected with various read-write devices, facilitates system integration, and can realize remote control and management through the management computer.
â— With automatic reset function. After the card or fingerprint is read, if the passer does not pass within the specified time, the system will automatically cancel the current pass permission of the passer, and the limited travel time can be set by the administrator.
â— Can be used with other types of channel products.
Technical parameters 1. Supply voltage: AC220V ± 10%, 50Hz;
2. Drive motor: 24V;
3. Working environment temperature: -30 °C ~ +70 °C;
4. Relative humidity: relative humidity ≤ 95%, no condensation;
5. Input interface: 12V level signal or 12V pulse signal with pulse width >100ms;
6. Drive current: >200mA;
7. Communication interface: RS485 electrical standard;
8. Communication distance: ≤ 1200 meters;
9. Gate length: 520mm; (outside the chassis)
10. Channel width: 550-600mm;
11. Traffic speed: ≤ 30 people/minute;
12. The lever swing angle: 120 degrees 13. Dimensions: length 1200 * width 280 * height 980mm / length 420 * width 330 * height 980mm can be customized;
14. Structure: Frame structure / standard stainless steel shell;
15. Gate steering: Supports one-way and two-way (optional);
16. Work environment: indoor and outdoor.
17. Provide three-roller main board 485 communication protocol, remote opening terminal program three roller gate function description:
1. All 304 stainless steel material, based on international norms of moisture, dust, and waterproof design, surface treatment: brushed (default) / polished (optional) / plating (optional) / paint (optional);
2. Based on the standardized design of the cabinet, the laser cutting, opening, a molding technology, mechanical drawing technology, modular docking, easy loading and unloading, high degree of exchange;
3 whole body stainless steel box thickness 1.2mm;
4. The brake lever is made of pure stainless steel;
5. The gate can be equipped with a sheath to prevent children and pedestrians from colliding and causing bodily harm;
6. Turn off the lever and turn off the lever manually.
7. Excessive people do not rebound, stability, and at the same time can provide information through the personnel collapse, completely one person one shot;
8. Humanized status identification to identify the current equipment operating status;
9. The use of standard electrical interfaces, can easily integrate magnetic stripe cards, barcode cards, ID cards, IC cards and other card readers on the device;
10. In place locking function, external force can not change its position;
11. In emergencies, the system has emergency measures to ensure that the channels are unobstructed and convenient for the timely evacuation of personnel;
12. The unified standard external electrical interface can be connected with a variety of readers, and can be remotely controlled and managed through a management computer;
Anhui Linbo Intelligent Technology Engineering Co., Ltd. He Honglin professional installation
Detailed introduction â— Reasonable and reliable design, low noise, stable operation and long service life.
â— Standard switch signal input, convenient external switch or bar code, IC card, fingerprint and other access controller to control roller gate action.
â— There are multiple operating modes to choose from, that is, two-way card reading or fingerprint current limiting; it is also possible to read a card or fingerprint while prohibiting the other direction; while reading a card or fingerprint, the other direction is free.
â— Hydraulic shock absorbers can freely adjust the tripping position of the three-roll gates. â— Anti-backlash. Pedestrians enter the channel from the opposite direction and lock immediately.
â— Prevents tailgating and prevents an excessive number of non-permissible situations.
â— With power off the lever, manual power up function, in order to quickly control the drop in an emergency situation, organize the evacuation.
â— It has a unified and standard external electrical interface, which can be connected with various read-write devices, facilitates system integration, and can realize remote control and management through the management computer.
â— With automatic reset function. After the card or fingerprint is read, if the passer does not pass within the specified time, the system will automatically cancel the current pass permission of the passer, and the limited travel time can be set by the administrator.
â— Can be used with other types of channel products.
Technical parameters 1. Supply voltage: AC220V ± 10%, 50Hz;
2. Drive motor: 24V;
3. Working environment temperature: -30 °C ~ +70 °C;
4. Relative humidity: relative humidity ≤ 95%, no condensation;
5. Input interface: 12V level signal or 12V pulse signal with pulse width >100ms;
6. Drive current: >200mA;
7. Communication interface: RS485 electrical standard;
8. Communication distance: ≤ 1200 meters;
9. Gate length: 520mm; (outside the chassis)
10. Channel width: 550-600mm;
11. Traffic speed: ≤ 30 people/minute;
12. The lever swing angle: 120 degrees 13. Dimensions: length 1200 * width 280 * height 980mm / length 420 * width 330 * height 980mm can be customized;
14. Structure: Frame structure / standard stainless steel shell;
15. Gate steering: Supports one-way and two-way (optional);
16. Work environment: indoor and outdoor.
17. Provide three-roller main board 485 communication protocol, remote opening terminal program three roller gate function description:
1. All 304 stainless steel material, based on international norms of moisture, dust, and waterproof design, surface treatment: brushed (default) / polished (optional) / plating (optional) / paint (optional);
2. Based on the standardized design of the cabinet, the laser cutting, opening, a molding technology, mechanical drawing technology, modular docking, easy loading and unloading, high degree of exchange;
3 whole body stainless steel box thickness 1.2mm;
4. The brake lever is made of pure stainless steel;
5. The gate can be equipped with a sheath to prevent children and pedestrians from colliding and causing bodily harm;
6. Turn off the lever and turn off the lever manually.
7. Excessive people do not rebound, stability, and at the same time can provide information through the personnel collapse, completely one person one shot;
8. Humanized status identification to identify the current equipment operating status;
9. The use of standard electrical interfaces, can easily integrate magnetic stripe cards, barcode cards, ID cards, IC cards and other card readers on the device;
10. In place locking function, external force can not change its position;
11. In emergencies, the system has emergency measures to ensure that the channels are unobstructed and convenient for the timely evacuation of personnel;
12. The unified standard external electrical interface can be connected with a variety of readers, and can be remotely controlled and managed through a management computer;
Anhui Linbo Intelligent Technology Engineering Co., Ltd. He Honglin professional installation
Swinging is the most popular activity for any outdoor playground or jungle gym! Complete or update your current backyard swing set with this Heavy-Duty Swing Seat. It is Made of high-quality materials to ensure hours of fun and years of play. Rated to hold up to 250 pounds. Our swing seat made of EVA plastic material, soft and strong which makes you feel comfortable, extruded without deformation
Eva Swing Seat,Eva Soft Patio Swing,Outdoor Indoor Eva Soft Board Swing,Eva Soft Board U-Shaped Swing Set
Taizhou Gentle Booms Outdoor Products Co.,Ltd , https://www.gentleboomssports.com