Chaochai Power is continuously recognized as a national high-tech enterprise

Recently, Liaoning Provincial Department of Science and Technology, Liaoning Provincial Department of Finance, Liaoning Province State Taxation Bureau and Liaoning Province Local Taxation Bureau Four Offices jointly issued a document, announced the "on the determination of Liaoning Province 2016 high-tech enterprise notice", Chaochao Power successfully Listed on the list, successfully passed the review of state-level high-tech companies, and was continuously recognized as a national high-tech enterprise.
Chaochai Chaochai Power is continuously recognized as a national high-tech enterprise

The national high-tech enterprise has a limited period of three years. In October 2013, Chaochai Power was recognized as a national high-tech enterprise for the first time. This determination was re-ascertained after the expiration of the previous certification period. In 2016, the Ministry of Science and Technology revised the documents such as the "Measures for the Determination of High-tech Enterprises" and the "Guidelines for the Management of High-tech Enterprises". The new management methods are more rigorous and standardized, and require higher standards for the application materials.

The recognition of the national high-tech enterprises is of great significance to the development of the company and is also fully recognized by the company's operating results, scientific and technological innovation capabilities, and continuous growth capabilities.


Overview:    Honing is to use the honing head honing workpiece and finishing on the surface of the grinding machine. It is mainly used in automobile, tractor, hydraulic parts, bearing, aviation and other manufacturing industries to honing the workpiece hole. Honing Machine has vertical and horizontal two kinds.

Our company main product Vertical Honing Machine(half automatic and CNC ) and Horizontal honing machine.

Classification and characteristics:


1.vertical honing machine spindle working travel shorter, suitable for honing cylinder body and casing hole, etc.With oil stone Mosaic honing head driven by the placement of the vertical spindle rotation, at the same time in hydraulic device driver operating vertical reciprocating feed movement.(see picture)

2.Horizontal honing machine work schedule long, suitable for deep hole honing, depth of up to 3000 mm.The placement of horizontal honing head not rotating, axial reciprocating motion, workpiece by the spindle drive rotation, for lathe bed in the middle of the workpiece at the center of the frame and the supporting honing rod guide frame.In the machining process, the honing head oil stone in swell-shrink institutions operating radial feed, the workpiece processing step by step to the required size.A new type of honing machine adopts hydraulic swell-shrink honing head.Most of honing machine is semi-automatic, often with automatic measuring device, can also be incorporated in the automatic production line of work.In addition to processing hole honing conversion, processing and other surface of the cylindrical honing machine, bearing raceway honing machine, flat honing machine and surface honing machine, etc.(see picture )

Operation requirements

1.Honing machine operation has a certain technology, need a understand technical person, this person should be trained about grinding safe operating methods.And make necessary preparation before operation can be carried out

2.Check the lubrication part of the honing machine, especially the gearbox, see if there were any lubricating oil.If there is no oil, to all the oil injection hole filling.

3.Check coolant cleaner.If insufficient cooling fluid, coolant will be listed.Coolant to regular cleaning, not allowed to use a squalid coolant.

Continuous work two months later, the need for an oil change.Under normal circumstances, in the first quarter in oil at a time.The hydraulic oil 20 # engine oil should be adopted in general.An oil change, need to use kerosene oil filter and oil tank cleaning.

4.After the machine is idle for a period of time, in order to discharge the air in the hydraulic line, and check the work of each part is normal.

Machine with hydraulic oil temperature, generally does not allow more than 60 ℃, the highest must not exceed 65 ℃, otherwise the cooling measures should be taken or stop working.

5.Check the sharpening stone size is correct, whether the honing head increases and flexible, fastening oilstone seat spring is strong.

6.Adjust spindle rotation and reciprocating motion, make it meet the requirements of the process specification.

7.Measuring tool ready, and check the door of the work is normal, the precision of measuring whether or not up to standard.

8.Need to check in accordance with the requirements in place to ensure the personal safety and honing machine work in place.

PICTURE:


1.Half automatic honing machine (Also named ordinary honing machine)

M42152MB2240x100MB4220x100

2.CNC Honing Machine


2mk2225x702MK2218z


Technical services include:

1. Pre-sale consultation and necessary process test;

2. Cooperate with the user to select suitable models and offer;

3. The machine installation, commissioning, test processing and training operators;

4. Equipment warranty troubleshooting and maintenance;

5. Warranty period of all kinds of services, including troubleshooting and maintenance






Honing Machine

Honing Machine,Hydraulic Honing Machine,Vertical Honing Machine,CNC Vertical Honing Machine

NingXia DaHe Machine Tool (Group) Imp And Exp Co.,Ltd , https://www.nxdhjcmachine.com