What are the reasons that affect the braking effect of single-bridge box trucks? This is a problem that truck drivers need to know. The main reason that affects the brake effect is mainly the driver's personal operation mode. Then Xiao Bian next carefully answers the specific reasons for everyone.
1. The brake fluid of single-bridge box trucks is still in the effective range. On the operating instructions of single-axle box trucks, drivers are required to periodically replace the brake fluid. Although the manufacturer's requirements are relatively conservative, most of them are for safety reasons. The use of brake fluid for trucks is too long, and their performance is affected by the brakes. It should also be noted that if there is air in the brake fluid, even a small amount of air in the brake fluid will affect the braking effect.
2. Whether the brake pads used by single-axle box trucks can meet the standards, if the brake pads of the vehicles have reached a certain level of wear, the braking effect will also decrease at the same time. At this time, new brake pads need to be replaced immediately. Now. The brake pads are incapable of wear, even if they are slightly cracked, they will affect the braking effect of single-axle box trucks.
3. The condition of the road surface under different weather conditions will also be different. For example, in the rainy day, or in the rubble and sandy soil, driving the single-aisle box truck, the braking effect will also have the same Changed. In addition, the driver of each single-axle box truck has different driving methods, so the frequency of stepping on the brakes is not the same, so it is not easy to use an accurate time to determine the replacement period of the brake pads. In fact, the main single-bridge box trucks are regularly maintained and maintained, and the wear level of the brake pads is observed. Generally, the thickness of the brake pads is about 1.5 centimeters when the new car is used. If the thickness is already 1/3 of the original, Then you need to replace it immediately.
If you want to change the brake pad replacement cycle for a single-bridge box truck, it will still be related to the driver's driving operation. Do not experience any sudden brakes. This method is intended to be safe, but it is also triggered. The main reason for security risks. The current passing vehicles are normal driving and there are no obstacles. Suddenly a sudden brake will make the rear car overwhelmed, which will lead to rear-end accidents. Therefore, for safety, when driving a single-axle box truck, Must be based on the current situation to do a good job of deceleration preparations, and then decide whether to properly apply the brakes, this way of operation can not only save fuel, but also to extend the brake replacement cycle.
Yamaha Motorcycle Starter Motor
Yamaha Motorcycle Starter Motor,Bike Starter Motor,Starter Motor In Bike,Motorcycle Starter Rebuild
RUIAN ZHONGTE ELECTRIC MOTOR CO.,LTD , https://www.cn-zhongte.com