Plastic Gear of Conveyor Belt

  • Model NO.: G-3
  • Hardness: Middle
  • Toothed Portion Shape: Customized
  • Type: Customized
  • Overall Width: 300-4200
  • Running: Stainless Steel for Food
  • Changes Way: Stepped
  • Specification: Type 700
  • HS Code: 7326201000
  • Application: Conveyor
  • Manufacturing Method: Customized
  • Material: Plastic
  • Size: Any Size Is Possible
  • Filter Type: According to You
  • Manipulate Way: Robotics
  • Trademark: WMB
  • Origin: Jiangsu, China
This product widely used in conveyor machinery.
Advantages:
1. Physical properties and high mechanical properties
2. Low noise, low coefficient of friction, sliding performance is good, good wear resistance, also protect the workers health.
3. Safe and reliable, in case of a faulty component, can protect the other components are not damaged
4. Light weight, only 1/7 of the manganese steel lining board, greatly reducing the weight of cylinder.
5. Life is 5 times longer than the metal


Belts depend on the right driving and turning wheels to operate well without interruption,
which is why WMB produces the required sprockets,rollers,matching the specific mesh belt.
 
Sprockets are equipped with special teeth configured for the best structure,
and rollers are available to drive the entire width of the belt.
 
The sprocket: Contains non-standard sprocket (customized according to customer drawings), standard sprocket (American Standard and metric). The size of sprocket according to the pitch and tooth number. Stainless steel with sus304.201 and other brands. Chain wheel according to the installation size, speed, torque, equipment use to select the model. The general principle of teeth number of sprocket selection: More than 19 teeth is generally used in high speed driving sprocket, under normal operating conditions of operation. 17 teeth is only used for fine pitch gear. 23 teeth or more than 23 teeth, recommended for the impact of. When the ratio is low, with a high number of teeth sprocket can greatly reduce the amount of rotation of the chain link, the tensile load and the load Bearing.

Quick Details
Place of Origin: Jiangsu, China (Mainland)
Material: Stainless Steel Wire
Type: Weave Wire Mesh
Application: Screen
Weave Style: Plain Weave
Wire Diameter: customized
Technique: Welded Mesh
Model Number: decoration
Brand Name: WMB
Packaging & Delivery

Packaging Details:
packed in case according to your requirements
Delivery Detail: 4-6 weeks

Sensors of various products, including crankshaft position sensors, camshaft position sensors, throttle position sensors, ABS sensors etc. hundreds models of products. We also provide product pictures and basic parameters to satisfy client`s needs.


One of auto technology development characteristics is more and more parts adopt the electronic control. Sensors are usually composed of sensitive element, transformation components and measuring circuit. According to the function of the Sensor, it can be classified as measuring position, temperature and pressure speed and so on. Each of them performs their own duties. Once a sensor failure, the corresponding device will not work properly even doesn`t work. Therefore, the role of the sensors in the car is very important. At present, there are nearly one hundred sensors installed in the ordinary family car, and about 200 sensors in the luxury car.


Sensor

Position Sensor,Engine Position Sensor,Electrical Sensor,Abs Sensor

NINGBO DGOFEN AUTO TRADE CO., LTD , http://www.dgofen.com