How is the use of linear guides well-conditioned and conditional

The function of linear guides used on the machine tool is to play an effective role in guiding and supporting them. Such a role can be said to be very important in production. Not only can the efficiency of production be improved, the key is the quality of production. There is a great guarantee. It should be said that with linear guides, the precision of bows and arrows processed by the machine tool can be guaranteed.

The linear guide rail slider and the rail between the terminal unit design, this will allow the linear guide rail at the same time to withstand the load in all directions such as up and down, left and right, the patented reflow system and streamlined structural design allows the linear guide rail has a smoother and low noise movement.

The linear guide rail is a kind of rolling guide in the course of operation, mainly by the wireless rolling cycle of the ball between the slider and the guide rail. This will enable the load platform to move along the guide rail with high accuracy and linear motion. When used and the coefficient of friction is effectively reduced to one-fifth of the usual drive sliding guide, a very high positioning accuracy can easily be achieved.

When the linear guideway is used, it is necessary to ensure the progress, so that the apparatus has better guidance in the process of use, and then there is a smooth running state which is also a necessary condition for the machining of the machine tool. However, during the operation of such equipment, the use of linear guide rails may occur due to the large amount of air in the air or the cause of smoke. The main reason for these problems is that the surface of the linear guide rails With a lot of dirt, only the timely cleaning of these dirt can ensure the good operation of the linear guide.

In order to ensure the good operation of the linear guide rails, in order to ensure the quality of the processed workpieces, we must do daily maintenance of the linear guide rails before use. When cleaning, be sure to use a rag, be sure to use a dry rag with a good softness, and then after the cleaning is finished, apply the lubricating oil in time.