Digital Temperature Control Gas Pipeline Butt Fusion Welding Machine

Hydraulic Butt Fusion Welding Machine TSD630:

This machine is designed for butt welding of pipe-to-pipe and pipe-to-fitting of PE PP PVDF and
other thermo-plastic materials.It can work in trenches,worksite and workshop,and it is an ideal
joining equipment for water and gas supply pipelines.

Characteristic & Benifit:

1.Detaching device is especially designed to break off melted pipes end from the heating plate
on the expiry of heating up.
2.Safety switch enables the trimmer to start only when it is located in the operation position.
3.A mechanical lock excludes the disengagement of the trimmer during the operation
4.Removable heating plate with DuPont high quality non-stick PTFE coating, and also equipped
with digital temperature controller
5.Low temperature difference in heating plate surface, within7 degree
6.Steel stand for trimmer & heating plate is with location pin for heating plate for carrying protection.
7.Incorporated with large easy to read scale pressure gauge, accumulator, pressure regulation
valve, swing check valve, high pressure hoses, and quick couplers
8.Imported oil seal & Italian quick couplers
9.Fine operation panel with clearly strong meshing printing character



Specification & Detail
 

 



Company Information:

TSD Plastic is located in the coastal city-Qingdao, and the factory is only 1km away from Qingdao
airport, 60km away from Qingdao seaport. The convenient transportation saves a lot of time and
cost for our esteemed clents. TSD Plastic Company has its own plastic sheet production line,
adhesive coating machine for heat shrinkable tapes, electro fusion welding joint line, plastic
sheet and plastic welding rod All the products are produced at its own workshop from raw
material to end products, so the best quality of products can be controlled. TSD products are
certified to internationalstandards like DVGW, ISO9001, Petro China ect, anexported to more
than 20 countries, which has got good reputation because of good quality with very competitive
prices!



 
Hydraulic Butt Fusion Welding Machine TSD630:

This machine is designed for butt welding of pipe-to-pipe and pipe-to-fitting of PE PP PVDF and
other thermo-plastic materials.It can work in trenches,worksite and workshop,and it is an ideal
joining equipment for water and gas supply pipelines.

Characteristic & Benifit:

1.Detaching device is especially designed to break off melted pipes end from the heating plate
on the expiry of heating up.
2.Safety switch enables the trimmer to start only when it is located in the operation position.
3.A mechanical lock excludes the disengagement of the trimmer during the operation
4.Removable heating plate with DuPont high quality non-stick PTFE coating, and also equipped
with digital temperature controller
5.Low temperature difference in heating plate surface, within7 degree
6.Steel stand for trimmer & heating plate is with location pin for heating plate for carrying protection.
7.Incorporated with large easy to read scale pressure gauge, accumulator, pressure regulation
valve, swing check valve, high pressure hoses, and quick couplers
8.Imported oil seal & Italian quick couplers
9.Fine operation panel with clearly strong meshing printing character



Specification & Detail
 

 



Company Information:

TSD Plastic is located in the coastal city-Qingdao, and the factory is only 1km away from Qingdao
airport, 60km away from Qingdao seaport. The convenient transportation saves a lot of time and
cost for our esteemed clents. TSD Plastic Company has its own plastic sheet production line,
adhesive coating machine for heat shrinkable tapes, electro fusion welding joint line, plastic
sheet and plastic welding rod All the products are produced at its own workshop from raw
material to end products, so the best quality of products can be controlled. TSD products are
certified to internationalstandards like DVGW, ISO9001, Petro China ect, anexported to more
than 20 countries, which has got good reputation because of good quality with very competitive
prices!



 

Series Steel Structure Industrial Cooling Tower

Tower structure: all steel structure, tower skeleton, cloth water system, climbing ladders, guardrails are Q235-B material, anti-corrosion using hot-dip galvanizing, surround panel for glass Glass steel.

Windpipe: kinetic energy recovery type, air flow organization is reasonable, high efficiency;
Fan: Wing-type adjustable cooling tower dedicated shaft fan, blades are aluminum alloy or glass steel.Motors,

gearboxes: YE2 series outdoor energy-efficient energy-saving motors, protection class IP55, insulation class F-class.

Filler: modified PVC raw material thin belly filler, high temperature, aging, flame retardant, bonding into a block strength.

Water receiver: the use of high-efficiency low-resistance rib arc water receiver, modified PVC material pull squeeze molding, water collection effect is significant, the drift rate is less than 0.01%.

The fan system tower is equipped with motors, gearboxes, fan access platforms and passageways, and there are climbing ladders and guardrails outside the tower.

Pool: This tower's pool and foundation, pre-buried steel plate, etc. by the user is responsible for, the water level should be controlled at -0.25-0.3m as well.

Applied to petroleum, chemical, metallurgy, medicine, electricity and other industrial large water circulation system.

Series Steel Structure Industrial Cooling Tower,Industrial Water Cooling Tower,Industrial Cooling Tower,Mechanical Cooling Tower

Wuxi Ark Fluid Science Technology Co., Ltd. , https://www.arkfluid.com