The energy-saving ball mill is the key equipment for crushing the material after it has been crushed. It is widely used in cement, silicate products, new building materials, refractory materials, fertilizer, black and non-ferrous metals and other metals and glass ceramics production industry, a variety of ores and other materials can be dry grinding or wet grinding .
The six major reasons for the heat of the ball mill motor bearing
The temperature of the energy-saving ball mill and the motor bearing rises. If it exceeds the regulations, it will seriously damage the energy-saving ball mill and affect the service life of the ball mill. Energy-saving ball mill motor bearing temperature is too high, there are six aspects.
1. Check the lubrication points of all parts of the energy-saving ball mill. The lubricating oil grades used are consistent with the factory specifications.
2. Check whether the energy-saving ball mill lubricant and grease are deteriorated.
3. Check if the lubrication pipeline of the energy-saving ball mill is blocked, or the lubricant does not directly enter the lubrication point, and the oil quantity is insufficient to cause heat.
4. The side clearance of the energy-saving ball mill bush is too small, the gap between the bush and the shaft is too large, and the contact points are too much to form a uniform oil film on the bearing bush.
5. The energy-saving ball mill rolling bearing has too much or too little grease. Excessive formation of rolling elements stirs the grease to generate heat, and the heat is not easy to dissipate. Too little lubrication, the amount of oil should be increased according to the regulations, generally 1/3 to 1/2 of the bearing clearance is more appropriate.
6. The sealing device of the hollow shaft at both ends of the energy-saving ball mill body is too tight, or the sealing body iron piece is directly in contact with the shaft.
Goodsense Explosion Protected Diesel Forklift advantages:
- General explosion proof design, high reliability, superior performance
- Unique Cooling system, keep diesel forklift run at low temperature
- Cold light source lamps to keep low temperature
- Explosion-proof protection on Starter, Generator, Battery, Instrument and Switches
- Exhaust flame arrester and Spark Eliminator
- Integrated air intake system
- Antistatic Tire, leather Seat, fan and other protection devices
- Engine flame out device
- Standard Explosion proof fork
- Intelligent temperature monitoring system
Application Area:
1.Warehouse
2.Port
3.Factory
4.Distribution Center
5.Logistics
If you have any other questions,please contact us directly.Our forklift are all with high quality,and you can choose any other engine to equip.It can be produced according to your idea.And we invite you to visit our factory.
Explosion Protected Diesel Forklift
Explosion Protected Diesel Forklift,Anti-Explode Diesel Forklift,Forklift For Explosive Place
ZHEJIANG GOODSENSE FORKLIFT CO.,LTD , https://www.dieselforklift.nl