The lorry driver pulls goods outside all the year round. He is earning some money to help his family. Their work is not only hard, but there is also a certain degree of danger. As long as one is inattentive, it is very easy to have a car accident. Moreover, large trucks are large and large inertia. Once a car accident occurs, it is a disaster. All lorry drivers are more cautious in driving, so as to avoid any accidents on the road, truck drivers must be careful when driving on the following roads.
I. No signal lights in the suburbs
Large trucks generally cannot enter the main city and often travel in open areas outside the city. Suburbs have less traffic and transportation facilities are not perfect. Many drivers will relax their vigilance, speeding, and turning their heads to their will. Tragedy often occurs at this time. At intersections, there is no mutual accommodation. The driver pays less attention to the surrounding conditions. The collision of vehicles is a matter of minutes. If the car collided with a large truck, the consequences would be disastrous.
Second, the viaduct and Tuanwu Road are very dangerous
Because there are many domestic vehicles, in order to evacuate the traffic, many places will choose to build viaducts. The viaducts are generally built on rivers and lakes outside the city. They are again in a very high position, with ice on winter roads and water in summer. When trucks are on the road, whether icing or stagnating water can cause trucks to slip. It is easy to slip out of the bridge and the bridge surface is too high above the ground. Once it falls, it is almost impossible to survive.
Traffic visibility on the foggy roads is low. If the speed is too fast and the distance is too short, accidents are very likely to occur.
Third, the high-speed road crash accident-prone section
Mountain Tunnel:
From a brightly lit tunnel, the driver suddenly drove into a dimly lit tunnel. The eyes could not adapt quickly and there was a possibility of an over-deceleration in an emergency that led to a rear-end collision. The space in the tunnel is narrow. Whether the truck is in front or behind, once an accident occurs, it will affect many cars around.
Curve:
Especially on those extreme corners, there are cliffs and rivers on the left and the corners are steep and urgent. If you drive an express train on this road, you just want to find some stimulation. Large trucks are heavy and the operating system responds slowly. Deceleration occurs when the vehicle speed is relatively fast, and rollovers are likely to occur under the influence of inertia.
Crossing:
It is also easy for road accidents to occur in road accidents. Some truck drivers are in off-road sports cars. Because they are not familiar with road sections, there are cases of missed exports. If you miss the speed at the previous exit, you will have to run for several kilometers or even more than 10 kilometers. Some drivers will suddenly slow down or even reverse. The cars on the high-speed road are running faster. The brakes are in front, and the rear brakes are too late. The rear car may hit the front car directly.
Editor's Note: Driving on special roads, truck drivers must be careful, focused and clear-headed. If there is a sudden situation, the truck driver must make the right choice based on his own judgment.
Injection molding is a widely used molding process for thermoplastics. Some thermosets and elastomers are injection molded when equipment is modified and operating parameters allow for the cross-linking of materials.
It's possible to create complex, intricate shapes with injection molding. It requires designing and fabricating a mold whose cavity has the same geometry as the original part. It must also allow for part removal. Part sizes range from 50 grams (2 ounces) to 25 kilograms (55 pounds). Heavier items made using injection molding include automobile bumpers and refrigerator doors.
Plastic Injection,Injection Machine,Automotive Plastic Injection Parts,Mould Injection Parts
KUNSHAN YSL PRECISION MOULD CO.,LTD , https://www.yslprecisonmould.com