There is a safety hazard in the seat belt silencer buckle

There is a safety hazard in the seat belt silencer buckle More and more vehicles are equipped with a seat belt alarm system to remind drivers to wear seat belts. If it is not worn, the car will continuously issue a "squeaky" alarm. However, because of the alarm noise, a new commodity came into being and was welcomed.

The price of muffler buckles ranges from 5 yuan to 50 yuan, the price is not high, and it is very simple to use. As long as the silencer plug is buckled into the seat belt slot, the alarm sound will be eliminated. "The reason is the same as wearing a seatbelt, but there is no security."

Seat belt is the guarantee of driver's driving safety. The key moments will play a life-saving role. Seat belts and airbags are used as a protection facility. They are used in combination. If they are not wearing seat belts, once a traffic accident occurs, the role of airbags will be. It will drop significantly.

It is understood that not wearing a seat belt has become the third largest cause of road traffic fatalities after speeding and drunk driving. In a accident that could lead to death, fastening the seat belts can increase the chances of the people in the vehicle surviving by 60%. Therefore, to remind drivers and passengers, please consciously fasten the seat belt according to the regulations, to ensure the safety of themselves and others.

The silencer plug is buckled into the slot of the seat belt. The alarm sound is eliminated, but the trip has a security risk. The safety belt must be fastened in traffic regulations is a clear provision in the traffic regulations, designed to protect the safety of the driver. The use of seat belt buckles not only increases the danger, but also is a way to deceive yourself. It is hoped that drivers will consider safety and develop a good habit of wearing seat belts to protect themselves and others.

Safety Tips:

Correct use of seat belts should be tied to the hips as much as possible, not at the waist, shoulder belts should not be placed under the arm, should be inclined chest. In addition, when using seatbelts, do not allow them to press on hard, brittle objects such as cell phones, glasses, pens, etc. inside the pocket. Do not let the seat back tilt too much, otherwise it will lead to the seat belt can not normally stretch or shrink, affecting the use of results.

Seat belts can wear out. When the seat belts are dirty, use neutral soap and lukewarm water, wipe them with a cloth or sponge, and be careful not to use dyes or bleach. Otherwise, they will corrode the seat belts. Do not use them. Hard brush scrub, so as not to reduce the seat belt's tensile strength.

Do not use the seat belt until it has dried. Check if there is any foreign matter entering the lock. If dust enters the junction of the shoulder belt, it will cause the seat belt to react slowly and wipe it with a clean dry cloth in time. If the seat belt is aged or damaged, it must be replaced at the 4S shop. Seat belts cannot be easily disassembled. If there are problems, professionals must be repaired.

Hydraulic Stamping Machine

China Angle Marking Machine Suppliers

HYDRAULIC Stamping machine


Applicable Industry:Used for marking of angles and metal plates in the field of steel tower industry.


Product Feature

The equipment possesses independent hydraulic power system and electric controlling system.

The hydraulic system uses the electromagnetic valve to reverse

Metal Stamping Machine,Hydraulic Stamping Machine,Stainless Steel Stamping Machine,Plate Stamping Machine

Shandong ShuoFang Environmental Technology Co., Ltd. , https://www.chinafincnc.com