PE E Type Tee Pneumatic Fittings

**Product Description** Electrical fusion PE pipe fittings are widely used in water supply systems for connecting polyethylene (PE) pipes. These fittings ensure a strong and leak-proof connection through the process of hot melt welding, making them ideal for cold water distribution. **Key Features:** 1. High Temperature Resistance 2. Excellent Heat Insulation and Energy Saving 3. Corrosion Resistant 4. Lower Installation Costs 5. Higher Flow Capacity 6. Long Lifespan 7. Environment-Friendly and Recyclable **Types of Electrical Fusion Fittings:** - Female Electrical Coupling - Electrical Coupling - Reducing Electrical Coupling - Male Electrical Coupling - Electrical Tee - Reducing Electrical Tee - 90° Electrical Elbow - Reducing Electrical Elbow - Male Electrical Elbow - Female Electrical Elbow **Raw Materials:** Made from high-quality polypropylene and national standard brass with zinc content, ensuring durability and safety. **Production Process:** 1. Measure and mark the depth or weld area on the pipe. 2. Remove the oxide layer from the welding zone. 3. Clean the pipe surface thoroughly to ensure no oil or dirt is present. 4. Insert the pipe into the fitting without any stress. 5. Connect the welding machine and input the correct welding and cooling time. 6. Confirm the settings and start the welding process. The machine will automatically signal when it's complete. **Factory Overview:** Shandong Kangyu Pipe Industry Co., Ltd. is located in Jiazhai Industrial Park, Linyi City, Shandong Province, China. We specialize in manufacturing high-quality PE pipe fittings and offer OEM services. **Contact Us:** Eileen Teng Shandong Kangyu Pipe Industry Co., Ltd. Jiazhai Industrial Park, Linyi City, Shandong Province, China Phone: +86 15168998025

Alloy Anchors

There are many shapes of metal anchors, such as Y-shaped, V-shaped, T-shaped, S-shaped, etc. (see Figure 1). Metal anchors are refractory castables, refractory plastics and refractory spray coatings used to support and fix thinner liners. Which shape of metal anchor to use depends on the structure of the lining. The shape of the Ceramic Anchor is shown in Figure 2. The upper and lower ends must be flat, and the remaining 4 sides are toothed to increase the occlusal area and friction with the lining body, and play a role of suspension and support

Alloy Anchors,Y Anchors,Studs Anchors,Aluminum Alloy Anchors

Puyu kiln technology (jiangsu) CO.,LTD , https://www.anchorpy.com