FOUR STROKE, 60HP, EFI OUTBOARD MOTOR
The PARSUN 60HP EFI outboard motor is a powerful, quiet, fuel-efficient, and reliable engine ideal for fishing boats. It features a single overhead camshaft (SOHC) and eight valves designed to maximize power and efficiency.
New Streamlined Top Cowling
This model includes an improved cowling design with an optimized intake air drainage system that effectively drains water entering the top cowling during normal operation.
Integrated Engine Monitoring and Warning System
Multiple sensors continuously monitor critical engine functions and provide early warnings such as Over-Rev Limiter, Over-Heat Warning, Start-in-Gear Protection, and Lower Oil Pressure Warning, automatically reducing engine power to prevent damage.
Multi-Point Electronic Fuel Injection with ECM Control
Controlled by the ECM unit, this engine ensures precise air-fuel mixture for optimal combustion and smooth performance. The long intake manifold delivers accurate air volume and timing for maximum density and power, while four electronic fuel injectors deliver the exact amount of fuel for best performance and economy.
Special Control Sensors for EFI System
Includes Crank Position Sensor, Throttle Position Sensor, Intake Air Pressure Sensor, Oil Pressure Sensor, Cooling Water Pressure Sensor, Intake Air Temperature Sensor, and Cooling Water Temperature Sensor for optimal engine performance.
Fuel-Water Separator and Fuel Filter
Equipped with a boat-mounted water-separating fuel filter to prevent debris or water from entering the engine.
Optimized Engine Emission
Features a blow-by-gas re-burning system and labyrinth exhaust to reduce emissions and noise. This engine meets both CE and EPA emission standards.
Ultimate Corrosion Protection System
Five-layer anti-corrosive paint system combined with stainless steel components and sacrificial anodes provides strong protection against corrosion.
Ultimate Convenience in Operation
1. Built-in freshwater flushing system for easy maintenance. 2. High output 18 amp alternator for battery charging and electronics. 3. Power trim & tilt or hydraulic system for easier operation. 4. Magnetic drain plug for oil changes. 5. Optional meters for RPM, speed, voltage, and trim angle. 6. Available Delphi E.F.I. diagnostic scanner.
PARSUN 60HP F60BEL-D Outboard Motor Specifications
| ITEM | F60 BEL-D |
| Engine type | 4-stroke, 4-cylinders, 8-valve, SOHC |
| Displacement | 996cc |
| Bore x stroke mm(in.) | 65.0×75.0(2.56×2.95) |
| Idling engine speed(rpm) | 750 ~ 850 |
| Full throttle RPM range | 5000 ~ 6000 |
| Max output KW(HP)@ r/min | 44.1(60)@5500 |
| Fuel induction system | Electric fuel injection |
| Ignition system | Micro computer |
| Starting system | Electric (Turn-key) |
| Alternator output | 12V DC / 18amp |
| Steering system | Tiller handle |
| Gear shift | Forward-Neutral-Reverse |
| Gear ratio | 1.85(24/13) |
| Trim and tilt system | Hydraulic elevator |
| Shaft length | 508mm (20 in.) |
| Max fuel consumption | 20 L/h |
| Fuel tank capacity | 24L |
| Sump oil capacity | 2.5L |
| Gear oil capacity | 430cc |
| Dry weight | 113kg |
* Depending on the models
* Propeller choice will vary by boat size and application.
* B=Back control(Tiller control), M=Manual start, S=Short shaft, L=Long shaft, W=Electric start+Manual start, F=Front control(Remote control), T=Electric tilt
Honeycomb gas seals are mainly used in turbine machinery such as aviation engines, gas turbines, and steam turbines, as well as chemical equipment. Seals are mainly divided into blade top seals, baffle (or stationary blade ring) seals, and shaft seals based on their position and function.
Honeycomb Seal,Engine Honeycomb Steam Seal,Steam Engine Honeycomb Seal,Steam Honeycomb Engine Seal
Shandong Mingtu Precision Machinery Co., Ltd , https://www.mthoneycombs.com